Standards we build to
ASME – equipment rating and code compliance
The American Society of Mechanical Engineers publishes standards governing pressure vessels, piping, boilers, elevators, and other mechanical equipment. ASME-code equipment requires durable nameplates that carry specific rating information — design pressure, temperature, manufacturer, serial number, National Board number, and the ASME code symbol stamp where applicable.
Holland Nameplate produces ASME code nameplates and equipment rating plates on stainless steel and anodized aluminum in formats and thicknesses suitable for stamping, etching, or engraving by the equipment manufacturer or authorized inspector. Common applications include:
- Boilers and pressure vessels (ASME Section I, Section VIII Division 1 & 2)
- Piping (ASME B31 series)
- Industrial and commercial boilers, heat exchangers, and process equipment
- Elevators and escalators (ASME A17 series) where rating plates are required
- Valves, flanges, and pressure components requiring traceable identification
ASME code nameplates typically require specific text formatting, durability against the equipment's service environment, and permanent attachment (usually rivet or weld, sometimes adhesive with supplemental mechanical fastening for pressure-containing equipment).
ANSI – safety signs and identification
The American National Standards Institute, particularly through ANSI Z535, governs the format, color, signal words, and symbol use on safety signs and equipment warning labels. ANSI Z535 compliance ensures that safety information is presented in a consistent, internationally recognizable format that's been human-factors tested for clarity and urgency.
Holland Nameplate manufactures ANSI Z535-compliant safety nameplates and warning labels in the formats the standard specifies:
- ANSI Z535.1: Safety color coding (safety red, orange, yellow, green, blue, etc.)
- ANSI Z535.2: Environmental and facility safety signs
- ANSI Z535.3: Safety symbols and pictograms
- ANSI Z535.4: Product safety signs and labels (the standard most often applied to equipment-mounted warnings)
- ANSI Z535.5: Safety tags used in facility safety programs
- ANSI Z535.6: Product safety information in collateral materials
Our ANSI Z535 safety nameplates use the signal words (DANGER, WARNING, CAUTION, NOTICE), color schemes, symbol layouts, and typography specified in the standard, on durable metal or laminate substrates suitable for the equipment's service environment. See also our Safety Nameplates product page.
NEMA – enclosure and electrical equipment marking
The National Electrical Manufacturers Association publishes standards governing electrical equipment, including NEMA enclosure ratings (NEMA 1, 3R, 4, 4X, 7, 9, 12, etc.) that specify environmental protection levels. Equipment marked to NEMA standards typically requires nameplates that identify the enclosure rating, electrical characteristics, and manufacturer information.
Holland Nameplate produces NEMA-compliant nameplates for:
- NEMA-rated electrical enclosures: Identification of enclosure rating, electrical data, and manufacturer
- Industrial control panels: Rating plates for control panel builders working to NEMA ICS, UL 508A, and related standards
- Motor and generator nameplates: NEMA MG 1 rating information
- Transformer nameplates: NEMA TR 1 rating data
- Panelboards, switchboards, and control gear: Rating and identification per applicable NEMA and UL standards
Our NEMA-rated nameplates are built on substrates appropriate to the enclosure's service environment, with attachment methods (rivet, adhesive, weld) matched to the NEMA protection rating of the equipment.
ASTM – material and process standards
ASTM International publishes thousands of material and testing standards. For nameplate manufacturing, the most commonly referenced are:
- ASTM B209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate. Defines composition, mechanical properties, thickness tolerances, and surface quality for aluminum sheet used in nameplate production. Our aluminum nameplates are produced from ASTM B209-compliant material.
- ASTM A240: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Sheet, Strip, and Plate. Defines the grades (including 304 and 316) and properties of stainless steel sheet used in our stainless nameplates.
- ASTM D3359: Adhesion test method for coatings, applicable to painted and anodized nameplate finishes.
- ASTM G154 and G155: Accelerated weathering test methods for outdoor nameplate durability evaluation.
When your specification calls out an ASTM standard, we confirm our materials and processes meet the requirement before production begins.
Our production capabilities against these standards
Holland Nameplate's production capabilities support compliance across all four standard bodies:
- ISO 9001:2015 certified quality management system with documented traceability from raw material through finished product
- UL Authorized Supplier with pre-qualified material and process combinations under UL 969
- MIL-STD-130 capable for DoD contractor work (non-ITAR)
- In-house laser etching, chemical etching, screen printing, and digital printing on aluminum, anodized aluminum, and stainless steel
- Substrate range from .012" to .125" thickness across multiple alloys and grades
- Standard 5-day lead time with 98% historical on-time delivery
- Free customized design with no art or tooling charges
- In-house US manufacturing in Kansas City since 1916 — no offshore production, no reseller model
Frequently asked questions
We produce ASME-format nameplates suitable for the equipment manufacturer's or Authorized Inspector's code stamp application. The ASME code symbol stamp itself is applied by the certificate holder — we provide the durable, properly formatted nameplate that receives the stamp.
Yes. Our aluminum sheet substrates are produced to ASTM B209 composition, thickness, and property specifications. When your order specifies ASTM B209, we confirm our material certifications match before production.
Yes. We manufacture ANSI Z535-compliant safety nameplates and warning labels including DANGER, WARNING, CAUTION, and NOTICE formats with the specified color coding, signal word panels, and pictogram use. See our Safety Nameplates page for examples.
Yes. We produce nameplates identifying NEMA enclosure ratings, electrical ratings, and manufacturer information for panels, enclosures, motors, transformers, and other NEMA-rated equipment. The nameplate itself is matched to the enclosure's service environment.
We offer 200 series, 300 series, 304, and 316 stainless steel — all produced to ASTM A240 standards. 316 is preferred for marine and high-chloride environments; 304 handles most general industrial applications.
Yes. A single nameplate can be produced to ASTM B209 material specifications, meet ANSI Z535 safety formatting, and carry UL Recognized marks — provided the specifications are compatible. We confirm all applicable standards at the specification review stage before production.
Yes. Material certifications from our suppliers and Certificates of Compliance against specified standards are available on request at the time of order.
Contact us. We meet a wider range of industrial standards than the most common ones highlighted on this page. Tell us what your specification calls out and we'll confirm whether we can produce to it.
Request a quote
Send us your specification and we'll reply with pricing and lead time.
